1-866-494-4610

Field Controls 01804401 Double Acting Barometric Draft Control 7" Adjustable 0.01" to 0.1" W.C.

Field Controls 01804401 Double Acting Barometric Draft Control 7" Adjustable 0.01" to 0.1" W.C.
Images for general purposes only. Actual may be different than depicted.
Field Controls 01804401 Double Acting Barometric Draft Control 7" Adjustable 0.01" to 0.1" W.C.

Field Controls 01804401 Double Acting Barometric Draft Control 7" Adjustable 0.01" to 0.1" W.C.

SKU: 01804401
In Stock 1
Rating:
$111.01 /ea
0
$0.00
0
$0.00
0

Field Controls Draft Control

A double-acting control for gas-fired furnaces and boilers is widely used for conversion burner installations, gas draft-induced appliance operation with mechanical draft inducers, or sidewall power venters. It is also recommended for use on gas atmospheric appliances where a draft hood cannot be installed, and can improve combustion stability and draft on many gas atmospheric installations with venting problems. The MG-1 provides precise, accurate control of drafts st levels higher than permitted by a standard draft diverter, which is a frequent requirement with gas. Because it is double-acting, it opens out to relieve positive vent system pressures as low as .01". Draft adjustments using weights are simple and accurate from .01" to .1".

How Draft Controls Work?

Static pressure of the cool air exerts pressure on the outside of the furnace or boiler, the breaching, and stack. The pressure difference between the room air and heated gas (air) causes products of combustion to flow (draft) through the unit and rise through the breaching and chimney. Room temperature air enters through the barometric draft control in the precise amount needed to overcome the excess drafts caused by temperature variations, wind fluctuations, and barometric pressure changes. Combustion of fuel is complete and the process is stabilized. The velocity of combustion gases through the heat exchanger is slowed so more heat is extracted. The unit operates more efficiently, reliably, and requires less maintenance.

Use a Draft Control for:

  • Draft Inducers & Power Venters
  • Power Burners
  • Forced Draft Burner
  • Dual Fuel Appliances
  • Gas-Fired Appliances
  • Oil or Coal - Residential & Commercial

Following are the Attached files for this product:

Field Control 7MGI 7" Double Acting Gas Draft Regulator

Q & A: Ask the Questions, share answers

Do you have questions about this product?