1-866-494-4610

Honeywell C7061A1004 Dynamic Self-Check Ultraviolet Flame Detector

Honeywell C7061A1004 Dynamic Self-Check Ultraviolet Flame Detector
Images for general purposes only. Actual may be different than depicted.
Honeywell C7061A1004 Dynamic Self-Check Ultraviolet Flame Detector

Honeywell C7061A1004 Dynamic Self-Check Ultraviolet Flame Detector

SKU: C7061A1004
Usually Ships 1-2 Weeks
Rating:
$1,139.74 /ea
0
$0.00
0
$0.00
0
Honeywell UV Self-Checking Purple Peeper Flame Sensor

Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.

Features:
  • Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.
  • Can be mounted horizontally, vertically or at any angle in between.
  • The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.
  • Field replaceable ultraviolet sensing tube and quartz viewing window.
  • Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.
  • C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.
  • Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
  • Protective heat block built into mounting flange.
  • -40 F (-40 C) rated ultraviolet sensing tube is supplied.
  • C7061E meets NEMA 4 standards with viewing window rated to 20 psi.
  • C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Q & A: Ask the Questions, share answers

Do you have questions about this product?