The 100 Series is a cost-effective pressure and temperature switch for process plants and OEM equipment. The rugged, one piece enclosure features a slanted cover for wiring accessibility.
A wide variety of microswitch and process-connection options make this versatile series ideal for applications requiring a rugged weather-proof mechanical switch.
Typical applications that utilize the 100 Series are heat tracing, freeze protection, processing equipment (pumps, compressors), inputs for annunciator panels, and fire suppression systems.
• UL listed and cUL certified.
• CE compliant to low voltage directive and pressure equipment directive.
• Optional ATEX or GOST intrinsic safety compliance
• Single switch (SPDT or DPDT) output
• Welded stainless steel diaphragm models
• Ultra low pressure, “wc models
• Optional sensor material for corrosive media
• Polished stainless steel flushmount connection
• Pump switch models with wide adjustable deadband
-65 to 160°F (-54 to 71°C)
Ambient Temperature Limits
-40 to 160°F (-40 to 71°C); models 520-525, 540-548, 700-706, 15731-15736: 0 to 160°F (-18 to 71°C); Set point typically shifts less than 1% of range for a 50°F (28°C)
ambient temperature change
Set point repeatability
Temperature models: ± 1% of adjustable range
Pressure models 15623, 15731-15737, 171-174, 218, 270-376, 520-535, 540-543, 700-706, 560-564: ± 1% of adjustable range; models 190-194, 183-189, 483-494, 544-548,
565-567, 610-680, 15884: ±1.5% of adjustable range
Internal set point lock on all pressure models
Set point repeats after 15 G, 10 millisecond duration
Set point repeats after 2.5 G, 5-500 Hz
Die cast aluminum, epoxy powder coated, gasketed, captive cover screws
Enclosure type 4X
One SPDT snap action switch; switch may be wired “normally open” or “normally closed”
15A 125/250/480 VAC resistive except for H100-15623, 15731-15737, 15884, 20A 125/250/480 VAC resistive, B100-13546 and E100-13545, 22A/480 VAC. Electrical switches have limited DC capabilities at 24-30 VDC, 2A resistive and 1A inductive. 125 VDC, 0.5A resistive, 0.03A inductive. Consult factory for additional information.
2-7 lbs; Varies with model
1/2” NPT (female); Two 7/8” diameter knockouts
Models 15623, 218, 270-376, 610-680, 701-706, 15731-15884: 1/4” NPT (female); Models 171-194, 483-494, 520-535, 15737: 1/2” NPT (female); Models 540-548: 1/8” NPT (female); Models 560-564: 2” Sanitary Fitting; Models 565-567: 1.5” Sanitary Fitting (Sanitary fittings mate with Tri-Clamp® fitting systems)
Bulb and capillary: 6 feet 304 stainless steel except for E100-13545, 10 feet 304 stainless steel
Immersion stem: nickel-plated brass (standard) except for B100-13546 stainless steel; optional 316L stainless steel
1BS/BC are solvent filled, models 2-8 non-toxic oil filled
Type F typically 1% and type B, C, and E typically 2% of range under laboratory conditions (70°F ambient circulating bath at rate of 1/2°F per minute change)
Heat tracing or Freeze protection
Thermostats designed specifically for heat tracing and freeze protection ambient sensing applications are available with types B100 and E100
UE declarations and third-party issued Agency certifications are available for download at www.ueonline.com/prod_approval.
United States and Canada
UL Listed, cUL Certified
Temperature: UL 873; CSA C22.2 no. 24, File # E10667
Pressure: UL 508; CSA C22.2 no. 14, File # E42272;
Enclosure Type 4X
Canadian Registration Number (CRN): Refer to www.ueonline.com/certifications for list of approved
|Adjustable Set Point||30" Hg Vac to 0|
Following are the Attached files for this product: